5 Reasons To Buy Tankless Water Heater for Sale

A water heater is a crucial piece of equipment that can be found in almost every household, especially those in colder regions. Today, with the advent of technology, it has transformed into its better version, commonly available on the market as a tankless water heater for sale. For homeowners, it’s an excellent upgrade as it offers a plethora of benefits that its predecessors failed to provide. If you are looking for a water heater for your home, here’s why you should go for the tankless variant:

Energy efficient
Unlike traditional water heater that continues to heat water, whether you require hot water or not, a tankless water heater for sale only works when you need hot water. This way, it helps save expensive electricity units and lower your energy costs.

Lower utility bills
Since a tankless water heater utilizes less energy, it has a huge impact on your utility bill, lowering it to save you a considerable amount of money. On average, upgrading your water heater can help you save hundreds of dollars a day.

Durable
Traditional water heating system doesn’t last more than 3 or 4 years. This means that you need to replace or repair it after every 3 or 4 years, putting pressure on your budget. However, a tankless water heater for sale has an extended lifetime, lasting for more than 10 years, provided you routinely maintain and timely repair it if and when necessary.

Endless hot water supply
With a conventional heating system, water is stored in a tank, which may run out in a short period. On the other hand, tankless water heating systems get water directly from the main source and heat it, offering your endless supply of hot water whenever needed.

Low maintenance
While maintenance is crucial to extend the life of a tankless water heater for sale, it’s insignificant in comparison to conventional tank systems. It only requires annual maintenance, which is relatively low.

Final note
If you have been looking for a water heating system for your home, look no further and get a tankless water heater for sale and enjoy an endless supply of hot water without huge energy costs.

Everything You Must Know About Water To Air Heat Exchanger

Heat exchangers transfer heat between different liquids (gas or liquid) without combining or touching each other directly. Such devices can, therefore, pass heat without moving the heat-carrying gas or water. Heat exchangers can allow buildings to cool or heat, and machinery and engines can also work more efficiently. There are several types of heat exchangers, but they all do the same job — transferring heat from liquid to fluid. They work in various ways, however.

The process of heat transfer can be gas-to-gas, liquid-to-gas, or liquid-to-liquid, and usually does not involve the two fluids or gases that need to be mixed or come into direct contact. This article focuses on exchangers of liquid to gas heat, and more specifically, on exchangers of water to air heat.

What is a water to air heat exchanger?

Heat is transferred from air to water with air-to-water cooling. Cabinet cooling is one example of air-to-water cooling. The heat is moved from the ground to the air with surface-to-air cooling. Normally this method of cooling is used for liquids in the cooling process. Heat exchangers are widely used for house and car air conditioning. Thanks to the serpentine form of the inner tubing, this sort of heat exchanger are commonly called air coils, or just coils. For general, liquid-to-air and air-to-liquid HVAC coils have a revised design for crossflow. These are often referred to as heater cores for cars or other equipment.

Cleaning of a water-to-air heat exchanger

Keeping heat exchangers clean is a vital aspect of routine maintenance, but maintenance is often a refinery's poor relationship and where production often has an ultimate say.

Schedule maintenance

To keep the heat exchanger working without facing a problem, it is necessary that you keep tabs on its regular maintenance. Yes, regular maintenance is necessary to ensure efficient working for the heat exchanger. Though you will get a schedule maintenance table from the manufacturer, it is necessary to a little search keep track of it on your own. This will keep your water to air heat exchanger keep working for a longer time.

3 Tips To Effectively Clean Heat Exchanger

Keeping your heat exchangers clean is an essential aspect of routine maintenance, but maintenance is often a refinery's bad relationship and where production often has an ultimate say. Fouling can continuously build up and costs money in wasted energy, asset life, running time, etc. It is necessary to ensure that your stainless heat exchanger is clean and working efficiently for optimum performance and longer life. Along with the enhanced performance, a perfectly maintained heat exchanger also helps in reducing the electricity consumption and hence saving the money.

Here we are sharing some of the useful tips that will help you in cleaning you, heat exchanger.

Keep Cleaning on Schedule

Routine maintenance should be carried out according to a timetable, as the name implies, but using the right cleaning techniques (and not waiting until the need for cleaning is illustrated by delta P or increased energy consumption). Correct timing must be specified well in advance, depending on the specific heat exchanger in question. Make sure you have prescribed a cleaning time table for your exchanger and follow it rigorously without any fail.

But, the challenge is that neither supplier nor on-site maintenance teams will care about or have specific cleaning experience, leaving the option of cleaning method to the contractor. The supplier assumes that the contractor will choose the right cleaning method, which often returns to what they have done without too much innovation.

Remember External Surfaces

Tube sets, internal pipework, and shell sides are often the highest cleaning priority because chemical contaminants and build-ups most likely affect these surfaces. Inside heat exchanger equipment surfaces, however, still, play an important role in heat dissipation and efficient operations. This will help your stainless heat exchanger in maintaining the airflow for optimum performance without any problem.

Use the Right Tools

The removal of polymer deposits is particularly challenging, with some operators also trying to clear buildups using hammers, chisels, and chainsaws. Use simplified devices like these will almost certainly result in damage to equipment and a lack of effort on the part of employees when working with precision equipment.

Radiant Heating System: What is it And How is it Better

With the increasing popularity of the underfloor heating system in residential and commercial properties, it’s no surprise to see many people installing radiant heating systems in their homes. While the popularity of the underfloor system is justified by the advantages they offer, many people aren’t aware of their upgraded variant system and how they work. To help you understand, this blog is going to cover what radiant systems are and how they work. Let’s dive in:

What is a radiant heating system?

In a radiant heating system, warm water circulates through flexible plastic pipes & tubes (commonly known as PEX) located underneath or within the floors. These tubes or pipes carry warm water into different rooms or “zones” to heat or insulate the space and objects in every corner.
Along with PEX tubing, other components in these systems include pumps, a heat source, manifolds, and controls. A heat source is usually a boiler or a hot-water heater. That said, many people use other heat sources such as energy-efficient geothermal and solar systems.

How is a radiant heating system beneficial?

Since radiant floor heating systems are designed and installed in zones, you can control or change temperatures for each room, depending on your requirements. This makes them more energy efficient because you can always set your unoccupied or lower-use rooms to a lower temperature than rooms that are used often such as a kitchen, bathroom or basement. This way, not only do you reduce energy usage but you also save a hefty amount of energy bills. This is how they differ from other heating systems.

Bottom Line

If you want to keep your space insulated and warm, installing radiant floor heating systems is a good path to go down. However, it’s important that you choose the best quality system to ensure maximum durability and functionality.

If you are looking for a radiant heating system for your home or commercial property, Alfa Heating Supply is the place you might consider heading to. With over 20 years' experience of working with heating systems, they have the skills and expertise to help you with your heating requirements. Make sure you get in touch with them and discuss your needs to receive quality services.

How to Choose the Best Brass Barbed Tees

For heating systems, using the best components is crucial to ensure the system’s longevity and reliability. Out of all the components used in a heating system, a tee is one of the important parts that many people don’t pay attention to. As a result, they either have a damaged system soon enough or risk their safety as heating systems can wreak havoc. This is why experts recommend using brass barbed tees for maximum benefits.

Though brass barbed tees are the best fit for heating systems and fixtures, choosing the best one is challenging. With so many options available, how do you ensure you have the right tee for your system? To help you, here are a few things you might want to consider when looking for brass barbed tees:

Understand your needs

Brass barbed tees come in a wide range of sizes designed and built for different heating systems. Before you invest in these tees, make sure you gather some information about your system and the size of the tees you will need. You can even take professional help if you face trouble finding the size of tees you need.

Quality of tees

There’s no denying that brass barbed tees are made of brass. But different grades of brass are available in the market. Some are poor quality while many others are good, offering maximum durability and reliability. Make sure you look at the quality of brass used in the manufacturing of these tees before buying.

Consider the price

You may have a specific budget for brass barbed tees. You may also want the best quality supplies meeting your requirements within the budget. This is why it’s always best to compare the cost of the same product from different suppliers and then buy from the one who best meets your budget.

Bottom line

When buying tees for your heating system, always consider the factors mentioned above.

If you are looking for the best quality brass barbed tees, Alpha Heating is an online store you should head to. On their store, you can find a wide range of tees and get them delivered to your doorstep at a fairly reasonable time.

Characteristics Of Brazed Plate Heat Exchangers

Brazed plate heat exchangers are one of the oldest and convenient techniques in certain duties such as cooling, heating, evaporation and condensing. These compact plates are specially designed to transfer heat in many industrial and refrigerant applications. Thanks to their rugged and corrosion resistance properties, brazed plate heat exchangers are the most popular device in several industrial sectors. These devices are made in stainless steel with copper or nickel brazing materials. Its technique brings several benefits such as cost-saving, maintenance service, energy-saving, and feasibility due to its portable size. Some key advantages of brazed plate heat exchangers are:

• Easy to install
• Light in weight
• Consume small quantity of water
• Durable
• Low scaling coefficient

Types and benefits of different plate heat exchangers

There are four main types of plate heat exchangers sold in the market. They are:

Brazed Plate heat exchangers

 
Due to stainless steel plate composition with copper brazing, brazed plate heat exchangers are highly resistant to corrosion.

Gasketed plate heat exchangers

 
They are designed to seal plates together and protect against leaks. These plates are considered as user-friendly since you can easily remove them for cleaning or replacing.

Benefits of brazed plate heat exchangers

Owing to their dynamic purposes and abundant in the market, brazed plate heat exchangers are also cost-effective devices.

Semi-Welded plate heat exchangers

These exchangers possess special feature of welded and gasketed plates. They are used for transferring expensive materials since they have two plates welded together that can prevent fluid loss.

Welded plate heat exchangers

They are the best option for transferring fluids with high temperatures or corrosive materials. These plates are durable since the plates are welded together.

Uses of brazed plate heat exchangers

Brazed plate heat exchangers result in high efficiency and a very compact heat exchanger design since they produce highly turbulent flow in a counter-current direction. Some of their applications are:

• Central heating
• Heating and cooling in HVAC installations
• Hydraulic and lube oil coolers
• Tap water and radiator heating
• Geothermic and solar heating
• Evaporation and condensation in the refrigeration system

If you are looking for brazed plate heat exchangers, you can purchase the best products from a top distributor. The company is providing floor heating, domestic hot water heating, swimming pool heating, and other heating/plumbing systems at reasonable prices.